[vc_row][vc_column width=”1/3″][vc_single_image image=”1283″ img_size=”Large”][vc_single_image image=”1282″ img_size=”large”][/vc_column][vc_column width=”2/3″][vc_column_text]
In-mold label is mainly used for blow molding and injection molding of PP, PE, PET and other materials. Before blowing and injection molding, stick the printed in-mold labels into the blowing and injection mold cavity, the special glue of in-mold labels melts through the action of high temperature and high pressure, then the in-mold labels with the surface of the bottle or injection molding melt into one, when the mold is open, a beautifully printed bottle or injection is finished a one-time processing.
Most of the Injection Mould labeling materials are synthetic monofoil substrates.
The so called biaxal oriented polypropylene (BOPP or OPP). BOPP is a multi layer co-extruded film, available either cavitated white or transparent. Some of the white films have two specified surfaces, one for printing and other for the moulding. The printing surface is either glossy or matt with certain structure and the thickness of the substrate varies between 45-75 micron.
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]
It is a co-extruded, one side glossy, other side matte and both sides corona treated highly cavitated white opaque Bi-axially Oriented Polypropylene film.
Thickness
|
usually 70 micron, 65 micron or according to the customers’ requests.
|
Surface
|
Glossy, matte, orange peel etc. Both side corona treated
gravure printing ( inside printing, outside printing)
|
Ouf bopp film also can be used for UV printing ,IML process.
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][/vc_column][/vc_row]